Skip to main content

Examining help in the switch CLI

Examining help in the switch CLI 

Context Sensitive Help
Console Error Messages
Command History Buffer
Provides a list of commands and the arguments associated with a specific command.
Identifies problems with any switch commands that are incorrectly entered so that the operator can alter or correct them.
Allows recall of long or complex commands or entries for reentry, review, or correction.

6.1.5 This page will explain how the help system is used in the CLI of Cisco switches.
The CLI for Cisco switches is very similar to the CLI for Cisco routers.
To use the help system enter a question mark (?). When this sign is entered at the system prompt, a list of commands available for the current command mode is displayed. 
The help system is very flexible. To obtain a list of commands that begin with a particular character sequence, enter those characters followed immediately by the question mark (?). Do not enter a space before the question mark. This form of help is called word help, because it completes a word.
To list keywords or arguments that are associated with a particular command, enter one or more words associated with the command, followed by a space and then a question mark (?). This form of help is called command syntax help, because it provides applicable keywords or arguments based on a partial command.
The Interactive Media Activity will help students understand how switches reduce the size of collision domains.

The next page will discuss switch command modes.

Comments

Post a Comment

Popular posts from this blog

Windowing

Windowing 11.1.5 This page will explain how windows are used to transmit data. Data packets must be delivered to the recipient in the same order in which they were transmitted to have a reliable, connection-oriented data transfer. The protocol fails if any data packets are lost, damaged, duplicated, or received in a different order. An easy solution is to have a recipient acknowledge the receipt of each packet before the next packet is sent. If a sender had to wait for an ACK after each packet was sent, throughput would be low. Therefore, most connection-oriented, reliable protocols allow multiple packets to be sent before an ACK is received. The time interval after the sender transmits a data packet and before the sender processes any ACKs is used to transmit more data. The number of data packets the sender can transmit before it receives an ACK is known as the window size, or window. TCP uses expectational ACKs. This means that the ACK number refers to the next packet that is...
Post a Comment
Read more

OSI layers / Peer-to-peer communications / TCP/IP model

OSI layers 2.3.4 This page discusses the seven layers of the OSI model. The OSI reference model is a framework that is used to understand how information travels throughout a network. The OSI reference model explains how packets travel through the various layers to another device on a network, even if the sender and destination have different types of network media. In the OSI reference model, there are seven numbered layers, each of which illustrates a particular network function. - Dividing the network into seven layers provides the following advantages: • It breaks network communication into smaller, more manageable parts. • It standardizes network components to allow multiple vendor development and support. • It allows different types of network hardware and software to communicate with each other. • It prevents changes in one layer from affecting other layers. • It divides network communication into smaller parts to make learning it easier to understand. In the foll...
Post a Comment
Read more

1.2.2 RIP V2 Features

 1.2.2 RIP V2 Features This page will discuss RIP v2, which is an improved version of RIP v1. Both versions of RIP share the following features: It is a distance vector protocol that uses a hop count metric. It uses hold down timers to prevent routing loops – default is 180 seconds. It uses split horizon to prevent routing loops. It uses 16 hops as a metric for infinite distance. RIP v2 provides prefix routing, which allows it to send out subnet mask information with the route update. Therefore, RIP v2 supports the use of classless routing in which different subnets within the same network can use different subnet masks, as in VLSM. RIP v2 provides for authentication in its updates. A set of keys can be used on an interface as an authentication check. RIP v2 allows for a choice of the type of authentication to be used in RIP v2 packets. The choice can be either clear text or Message-Digest 5 (MD5) encryption. Clear text is the default. MD5 can be used t...
Post a Comment
Read more