Skip to main content

Networking Terminology (Data Network)


Networking Terminology
Data Network
2.1.1 Data networks developed as a result of business applications that were written for microcomputers. The microcomputers were not connected so there was no efficient way to share data among them. It was not efficient or cost-effective for businesses to use floppy disks to share data. Sneakernet created multiple copies of the data. Each time a file was modified it would have to be shared again with all other people who needed that file. If two people modified the file and then tried to share it, one of the sets of changes would be lost. Businesses needed a solution that would successfully address the following three problems:


• How to avoid duplication of equipment and resources
• How to communicate efficiently
• How to set up and manage a network

Businesses realized that computer networking could increase productivity and save money. Networks were added and expanded almost as rapidly as new network technologies and products were introduced. The early development of networking was disorganized. However, a tremendous expansion occurred in the early 1980s.

In the mid-1980s, the network technologies that emerged were created with a variety of hardware and software implementations. Each company that created network hardware and software used its own company standards. These individual standards were developed because of competition with other companies. As a result, many of the network technologies were incompatible with each other. It became increasingly difficult for networks that used different specifications to communicate with each other. Network equipment often had to be replaced to implement new technologies.

One early solution was the creation of local-area network (LAN) standards. LAN standards provided an open set of guidelines that companies used to create network hardware and software. As a result, the equipment from different companies became compatible. This allowed for stability in LAN implementations.

In a LAN system, each department of the company is a kind of electronic island. As the use of computers in businesses grew, LANs became insufficient.

A new technology was necessary to share information efficiently and quickly within a company and between businesses. The solution was the creation of metropolitan-area networks (MANs) and wide-area networks (WANs). Because WANs could connect user networks over large geographic areas, it was possible for businesses to communicate with each other across great distances. Figure summarizes the relative sizes of LANs and WANs.

Comments

Post a Comment

Popular posts from this blog

OSI layers / Peer-to-peer communications / TCP/IP model

OSI layers 2.3.4 This page discusses the seven layers of the OSI model. The OSI reference model is a framework that is used to understand how information travels throughout a network. The OSI reference model explains how packets travel through the various layers to another device on a network, even if the sender and destination have different types of network media. In the OSI reference model, there are seven numbered layers, each of which illustrates a particular network function. - Dividing the network into seven layers provides the following advantages: • It breaks network communication into smaller, more manageable parts. • It standardizes network components to allow multiple vendor development and support. • It allows different types of network hardware and software to communicate with each other. • It prevents changes in one layer from affecting other layers. • It divides network communication into smaller parts to make learning it easier to understand. In the foll...
Post a Comment
Read more

Advantages and disadvantages of link-state routing

Advantages and disadvantages of link-state routing 2.1.5  This page lists the advantages and disadvantages of link-state routing protocols. The following are advantages of link-state routing protocols:  Link-state protocols use cost metrics to choose paths through the network. The cost metric reflects the capacity of the links on those paths. Link-state protocols use triggered updates and LSA floods to immediately report changes in the network topology to all routers in the network. This leads to fast convergence times. Each router has a complete and synchronized picture of the network. Therefore, it is very difficult for routing loops to occur. Routers use the latest information to make the best routing decisions. The link-state database sizes can be minimized with careful network design. This leads to smaller Dijkstra calculations and faster convergence. Every router, at the very least, maps the topology of it...
Post a Comment
Read more

Symmetric and asymmetric switching / Memory buffering

Symmetric and asymmetric switching   4.2.8  This page will explain the difference between symmetric and asymmetric switching. LAN switching may be classified as symmetric or asymmetric based on the way in which bandwidth is allocated to the switch ports. A symmetric switch provides switched connections between ports with the same bandwidth. An asymmetric LAN switch provides switched connections between ports of unlike bandwidth, such as a combination of 10-Mbps and 100-Mbps ports. Asymmetric switching enables more bandwidth to be dedicated to the server switch port in order to prevent a bottleneck. This allows smoother traffic flows where multiple clients are communicating with a server at the same time. Memory buffering is required on an asymmetric switch. The use of buffers keeps the frames contiguous between different data rate ports. The next page will discuss memory buffers. Memory buffering   4.2.9  This page will explain what a memory buffer is...
Post a Comment
Read more