Troubleshooting IGRP
7.3.8 This page will introduce some commands that can be used to troubleshoot IGRP.
Most IGRP configuration errors involve a mistyped network statement, discontiguous subnets, or an incorrect AS Number.
The following commands are used to troubleshoot IGRP:
• show ip route
• debug ip igrp events
• debug ip igrp transactions
• ping
• traceroute
Figure shows output from the debug ip igrp events command.
Figure shows output from the debug ip igrp transactions command.
If the AS number is wrong and then corrected, it results in the output shown in Figure .
The Lab Activity will show students how to use the IGRP debug commands.
This page concludes this lesson. The next page will summarize the main points from this module.
No comments:
Post a Comment