Skip to main content

Semester 3 :- Module 1: Introduction to Classless Routing

Semester 3 
Module 1: Introduction to Classless Routing
Overview
Network administrators must anticipate and manage the physical growth of networks. This may require them to buy or lease another floor of a building for new network equipment such as racks, patch panels, switches, and routers. Network designers must choose address schemes that allow for growth. Variable-length subnet mask (VLSM) is used to create efficient and scalable address schemes.
Almost every enterprise must implement an IP address scheme. Many organizations select TCP/IP as the only routed protocol to run on their networks. Unfortunately, the architects of TCP/IP did not predict that the protocol would eventually sustain a global network of information, commerce, and entertainment.
IPv4 offered an address strategy that was scalable for a time before it resulted in an inefficient allocation of addresses. IPv4 may soon be replaced with IP version 6 (IPv6) as the dominant protocol of the Internet. IPv6 has virtually unlimited address space and implementation has begun in some networks. Over the past two decades, engineers have successfully modified IPv4 so that it can survive the exponential growth of the Internet. VLSM is one of the modifications that has helped to bridge the gap between IPv4 and IPv6.
Networks must be scalable since the needs of users evolve. When a network is scalable it is able to grow in a logical, efficient, and cost-effective way. The routing protocol used in a network helps determine the scalability of the network. It is important to choose the routing protocol wisely. Routing Information Protocol version 1 (RIP v1) is suitable for small networks. However, it is not scalable to large networks. RIP version 2 (RIP v2) was developed to overcome these limitations.
This module covers some of the objectives for the CCNA 640-801 and ICND 640-811 exams.
Students who complete this module should be able to perform the following tasks:
  • Define VLSM and briefly describe the reasons for its use
  • Divide a major network into subnets of different sizes using VLSM
  • Define route aggregation and summarization as they relate to VLSM
  • Configure a router using VLSM
  • Identify the key features of RIP v1 and RIP v2
  • Identify the important differences between RIP v1 and RIP v2
  • Configure RIP v2
  • Verify and troubleshoot RIP v2 operation
Configure default routes using the ip route and ip default-network commands

Comments

Post a Comment

Popular posts from this blog

OSI layers / Peer-to-peer communications / TCP/IP model

OSI layers 2.3.4 This page discusses the seven layers of the OSI model. The OSI reference model is a framework that is used to understand how information travels throughout a network. The OSI reference model explains how packets travel through the various layers to another device on a network, even if the sender and destination have different types of network media. In the OSI reference model, there are seven numbered layers, each of which illustrates a particular network function. - Dividing the network into seven layers provides the following advantages: • It breaks network communication into smaller, more manageable parts. • It standardizes network components to allow multiple vendor development and support. • It allows different types of network hardware and software to communicate with each other. • It prevents changes in one layer from affecting other layers. • It divides network communication into smaller parts to make learning it easier to understand. In the foll...
Post a Comment
Read more

PC Basic...

• Backplane – A backplane is an electronic circuit board containing circuitry and sockets into which additional electronic devices on other circuit boards or cards can be plugged; in a computer, generally synonymous with or part of the motherboard. • Network interface card (NIC) – An expansion board inserted into a computer so that the computer can be connected to a network. • Video card – A board that plugs into a PC to give it display capabilities. • Audio card – An expansion board that enables a computer to manipulate and output sounds. • Parallel port – An interface capable of transferring more than one bit simultaneously that is used to connect external devices such as printers. • Serial port – An interface that can be used for serial communication in which only one bit is transmitted at a time. • Mouse port – A port used to connect a mouse to a PC. • USB port – A Universal Serial Bus connector. A USB port connects devices such as a mouse or printer to the computer ...
Post a Comment
Read more

1.2.2 RIP V2 Features

 1.2.2 RIP V2 Features This page will discuss RIP v2, which is an improved version of RIP v1. Both versions of RIP share the following features: It is a distance vector protocol that uses a hop count metric. It uses hold down timers to prevent routing loops – default is 180 seconds. It uses split horizon to prevent routing loops. It uses 16 hops as a metric for infinite distance. RIP v2 provides prefix routing, which allows it to send out subnet mask information with the route update. Therefore, RIP v2 supports the use of classless routing in which different subnets within the same network can use different subnet masks, as in VLSM. RIP v2 provides for authentication in its updates. A set of keys can be used on an interface as an authentication check. RIP v2 allows for a choice of the type of authentication to be used in RIP v2 packets. The choice can be either clear text or Message-Digest 5 (MD5) encryption. Clear text is the default. MD5 can be used t...
Post a Comment
Read more