Skip to main content

The function of a wildcard mask


The function of a wildcard mask
11.1.4
This page will explain what a wildcard mask is and how it is used. A wildcard mask is a 32-bit quantity that is divided into four octets. A wildcard mask is paired with an IP address. The numbers one and zero in the mask are used to identify how to treat the corresponding IP address bits. The term wildcard mask represents the ACL mask-bit matching process and comes from an analogy of a wildcard that matches any other card in the game of poker. Wildcard masks have no functional relationship with subnet masks. They are used for different purposes and follow different rules.
The subnet mask and the wildcard mask represent two different things when they are compared to an IP address. Subnet masks use binary ones and zeros to identify the network, subnet, and host portion of an IP address. Wildcard masks use binary ones and zeros to filter individual or groups of IP addresses to permit or deny access to resources based on an IP address. The only similarity between a wildcard mask and a subnet mask is that they are both thirty-two bits long and use binary ones and zeros.
The mask in Figure would be written as 0.0.255.255. A zero indicates a value that will be checked. The Xs, or ones, are used to block values.  In the wildcard mask process, the IP address in the access-list statement has the wildcard mask applied to it. This creates the match value, which is used to compare and see if a packet should be processed by this ACL statement, or sent to the next statement to be checked. The second part of the ACL process is that any IP address that is checked by a particular ACL statement will have the wildcard mask of that statement applied to it. The result of the IP address and the wildcard mask must equal the match value of the ACL. This process is illustrated in the animation in Figure . There are two special keywords that are used in ACLs, the any and host options. The any option substitutes 0.0.0.0 for the IP address and 255.255.255.255 for the wildcard mask. This option will match any address that it is compared against. The host option substitutes 0.0.0.0 for the mask. This mask requires that all bits of the ACL address and the packet address match. This option will match just one address. The next page will teach students how to verify ACLs.

Comments

Post a Comment

Popular posts from this blog

OSI layers / Peer-to-peer communications / TCP/IP model

OSI layers 2.3.4 This page discusses the seven layers of the OSI model. The OSI reference model is a framework that is used to understand how information travels throughout a network. The OSI reference model explains how packets travel through the various layers to another device on a network, even if the sender and destination have different types of network media. In the OSI reference model, there are seven numbered layers, each of which illustrates a particular network function. - Dividing the network into seven layers provides the following advantages: • It breaks network communication into smaller, more manageable parts. • It standardizes network components to allow multiple vendor development and support. • It allows different types of network hardware and software to communicate with each other. • It prevents changes in one layer from affecting other layers. • It divides network communication into smaller parts to make learning it easier to understand. In the foll...
Post a Comment
Read more

PC Basic...

• Backplane – A backplane is an electronic circuit board containing circuitry and sockets into which additional electronic devices on other circuit boards or cards can be plugged; in a computer, generally synonymous with or part of the motherboard. • Network interface card (NIC) – An expansion board inserted into a computer so that the computer can be connected to a network. • Video card – A board that plugs into a PC to give it display capabilities. • Audio card – An expansion board that enables a computer to manipulate and output sounds. • Parallel port – An interface capable of transferring more than one bit simultaneously that is used to connect external devices such as printers. • Serial port – An interface that can be used for serial communication in which only one bit is transmitted at a time. • Mouse port – A port used to connect a mouse to a PC. • USB port – A Universal Serial Bus connector. A USB port connects devices such as a mouse or printer to the computer ...
Post a Comment
Read more

1.2.2 RIP V2 Features

 1.2.2 RIP V2 Features This page will discuss RIP v2, which is an improved version of RIP v1. Both versions of RIP share the following features: It is a distance vector protocol that uses a hop count metric. It uses hold down timers to prevent routing loops – default is 180 seconds. It uses split horizon to prevent routing loops. It uses 16 hops as a metric for infinite distance. RIP v2 provides prefix routing, which allows it to send out subnet mask information with the route update. Therefore, RIP v2 supports the use of classless routing in which different subnets within the same network can use different subnet masks, as in VLSM. RIP v2 provides for authentication in its updates. A set of keys can be used on an interface as an authentication check. RIP v2 allows for a choice of the type of authentication to be used in RIP v2 packets. The choice can be either clear text or Message-Digest 5 (MD5) encryption. Clear text is the default. MD5 can be used t...
Post a Comment
Read more