Skip to main content
This page will provide a brief review of routers.


A router is a special type of computer. It has the same basic components as a standard desktop PC. It has a CPU, memory, a system bus, and various input/output interfaces. However, routers are designed to perform some very specific functions that are not typically performed by desktop computers. For example, routers connect and allow communication between two networks and determine the best path for data to travel through the connected networks.



Just as computers need operating systems to run software applications, routers need the Internetwork Operating System (IOS) software to run configuration files. These configuration files contain the instructions and parameters that control the flow of traffic in and out of the routers. Routers use routing protocols to determine the best path for packets. The configuration file specifies all the information for the correct setup and use of the selected, or enabled, routing and routed protocols on a router.



This course will demonstrate how to build configuration files from the IOS commands in order to get the router to perform many essential network functions. The router configuration file may seem complex at first, but it will be easier to understand by the end of the course.



The main internal components of the router are random-access memory (RAM), nonvolatile random-access memory (NVRAM), flash memory, read-only memory (ROM), and interfaces.



RAM has the following characteristics and functions:



Stores routing tables

Holds ARP cache

Holds fast-switching cache

Performs packet buffering as shared RAM

Maintains packet-hold queues

Provides temporary memory for the configuration file of a router while the router is powered on

Loses content when a router is powered down or restarted

NVRAM has the following characteristics and functions:



Provides storage for the startup configuration file

Retains content when a router is powered down or restarted

Flash memory has the following characteristics and functions:



Holds the IOS image

Allows software to be updated without removing and replacing chips on the processor

Retains content when a router is powered down or restarted

Can store multiple versions of IOS software

Is a type of electrically erasable programmable read-only memory (EEPROM)

ROM has the following characteristics and functions:



Maintains instructions for power-on self test (POST) diagnostics

Stores bootstrap program and basic operating system software

Requires replacing pluggable chips on the motherboard for software upgrades

Interfaces have the following characteristics and functions:



Connect routers to a network for packet entry and exit

Can be on the motherboard or on a separate module

The next page will describe the role of routers in WANs and LANs.

Comments

Post a Comment

Popular posts from this blog

Windowing

Windowing 11.1.5 This page will explain how windows are used to transmit data. Data packets must be delivered to the recipient in the same order in which they were transmitted to have a reliable, connection-oriented data transfer. The protocol fails if any data packets are lost, damaged, duplicated, or received in a different order. An easy solution is to have a recipient acknowledge the receipt of each packet before the next packet is sent. If a sender had to wait for an ACK after each packet was sent, throughput would be low. Therefore, most connection-oriented, reliable protocols allow multiple packets to be sent before an ACK is received. The time interval after the sender transmits a data packet and before the sender processes any ACKs is used to transmit more data. The number of data packets the sender can transmit before it receives an ACK is known as the window size, or window. TCP uses expectational ACKs. This means that the ACK number refers to the next packet that is...
Post a Comment
Read more

OSI layers / Peer-to-peer communications / TCP/IP model

OSI layers 2.3.4 This page discusses the seven layers of the OSI model. The OSI reference model is a framework that is used to understand how information travels throughout a network. The OSI reference model explains how packets travel through the various layers to another device on a network, even if the sender and destination have different types of network media. In the OSI reference model, there are seven numbered layers, each of which illustrates a particular network function. - Dividing the network into seven layers provides the following advantages: • It breaks network communication into smaller, more manageable parts. • It standardizes network components to allow multiple vendor development and support. • It allows different types of network hardware and software to communicate with each other. • It prevents changes in one layer from affecting other layers. • It divides network communication into smaller parts to make learning it easier to understand. In the foll...
Post a Comment
Read more

1.2.2 RIP V2 Features

 1.2.2 RIP V2 Features This page will discuss RIP v2, which is an improved version of RIP v1. Both versions of RIP share the following features: It is a distance vector protocol that uses a hop count metric. It uses hold down timers to prevent routing loops – default is 180 seconds. It uses split horizon to prevent routing loops. It uses 16 hops as a metric for infinite distance. RIP v2 provides prefix routing, which allows it to send out subnet mask information with the route update. Therefore, RIP v2 supports the use of classless routing in which different subnets within the same network can use different subnet masks, as in VLSM. RIP v2 provides for authentication in its updates. A set of keys can be used on an interface as an authentication check. RIP v2 allows for a choice of the type of authentication to be used in RIP v2 packets. The choice can be either clear text or Message-Digest 5 (MD5) encryption. Clear text is the default. MD5 can be used t...
Post a Comment
Read more